West End Edinburgh · EH3 / EH12

    Driveways & Mews Paving for Edinburgh's West EndListed Buildings · Marshalls Heritage

    Conservation-officer approved driveways for Drumsheugh, Coates and Manor Place. Marshalls Registered Installers — laid to manufacturer specification on listed Georgian and Victorian townhouses.

    MarshallsRegister of Approved Installers
    Call: 0800 644 0131
    5.0/5 from 200+ Edinburgh reviews

    TL;DR - Key Takeaways

    • Marshalls Registered Installer for Edinburgh's West End (EH3 & EH12)
    • Listed-building & New Town Conservation Area specialists
    • Granite setts, Yorkstone flags, Marshalls Heritage Tegula
    • Mews paving — Belford Road, William Street, Stafford Street
    • Edinburgh Council listed-building consent paperwork handled
    • BS 7533-compliant sub-bases · Lifetime structural guarantee

    Who is the best driveway installer for Edinburgh's West End (EH3/EH12)?

    Edinburgh Driveways is a Marshalls Registered Installer serving Edinburgh's West End — Drumsheugh Gardens, Coates Crescent, Manor Place, Rothesay Place and the surrounding mews. We specialise in listed-building and New Town Conservation Area driveways using granite setts, Yorkstone and Marshalls Heritage block paving. Driveways £220-260/m² + VAT, full Edinburgh Council listed-building consent support, lifetime structural guarantee. Call 0800 644 0131 for a free survey.

    Listed-Building & Conservation Driveways in Edinburgh's West End

    Edinburgh's West End is the architectural heart of the New Town extensions — Drumsheugh Gardens, Rothesay Place, Coates Crescent, Eglinton Crescent and Manor Place form one of Britain's finest collections of A and B listed Georgian and Victorian townhouses. Behind them sits a network of original mews lanes — Belford Mews, William Street, Stafford Street, Drumsheugh Place — where coach houses are now some of the city's most desirable conversions. Every driveway, mews entrance and front-of-house surface in this area is, in planning terms, a heritage intervention.

    As a Marshalls Registered Installer, we specify and install the materials that consistently pass Edinburgh Council conservation-officer review: traditional granite and whinstone setts, genuine Yorkstone flags, and Marshalls Heritage Tegula in Pennant Grey or Charcoal. Tarmac, resin and standard concrete are routinely refused on listed properties — choosing the right material is the difference between a one-pass approval and a 12-month planning battle.

    Our Marshalls Register status means every West End installation follows Marshalls' published BS 7533 specification — deeper excavation, MOT Type 1 sub-bases compacted in layers, and blocks mixed across multiple packs to prevent shade patching. This unlocks full Marshalls product warranty support on top of our own lifetime structural guarantee, and gives conservation officers the documented installation trail they expect on listed buildings.

    EH3
    New Town Conservation Area
    A/B
    Listed Building Specialists
    Marshalls
    Registered Installer
    Lifetime
    Guarantee

    Granite & Whinstone Setts

    The default conservation-officer-approved choice for West End mews and front-of-house. Hand-laid on a rigid concrete bed with cement-sand jointing — the only finish that genuinely matches the original Georgian streetscape on Drumsheugh and Coates.

    £150-200/m² + VAT | 75+ years

    Yorkstone Flags

    Genuine Yorkstone in random or coursed sizes — the premium specification for Manor Place, Rothesay Place and Eglinton Crescent townhouses where authenticity is non-negotiable. Diamond-sawn or natural-riven finishes available.

    £160–£200+/m² | 100+ years

    Marshalls Heritage Tegula

    Tumbled, riven block paving in Pennant Grey or Charcoal — Marshalls' conservation specification. A cost-effective alternative that consistently passes West End planning review for 1880s+ Victorian extensions and rear access driveways.

    £185-240/m² + VAT | 25+ years

    Listed-Building Consent

    We handle all Edinburgh Council listed-building and New Town Conservation Area paperwork — surface, dropped kerbs, gate piers, railings and mews access. Pre-application consultation included on every West End project.

    Planning support included

    On the Marshalls Register

    How We Install a Marshalls Driveway in Edinburgh

    Edinburgh Driveways is on the Marshalls Register of Approved Installers, which means every driveway we lay follows Marshalls' published BS 7533 installation specification — step by step, audited, and backed by both our 25-year workmanship guarantee and the official Marshalls product guarantee.

    01

    Free Site Survey & Marshalls Sample Pack

    We visit your Edinburgh property, measure the area, assess drainage falls, kerb access and existing sub-base. You receive a physical Marshalls sample pack — Driveline, Argent, Tegula, Heritage and Drivesett — to compare against your stonework in natural light.

    02

    Excavation to BS 7533-Compliant Depth

    We dig out 200–250mm — 40% deeper than many cowboy installers. All spoil is removed from site by tipper. Geotextile membrane is laid over the formation to prevent sub-base contamination from Edinburgh's clay-heavy soils.

    03

    150mm MOT Type 1 Sub-Base, Plate-Compacted in Layers

    Marshalls' specification calls for a minimum 150mm of MOT Type 1 for residential driveways. We lay it in two 75mm lifts, each compacted with a 1.5-tonne vibrating plate to refusal. Falls are set at a minimum 1:60 toward the drainage point.

    04

    Edge Restraints on Concrete Haunching

    Every Marshalls driveway needs a rigid perimeter — without it, blocks migrate and joints open up. We bed soldier-course edging on a wet C20 concrete bed with full external haunching, exactly as specified in the Marshalls installation guide.

    05

    30–50mm Sharp Sand Bedding, Screeded Flat

    Sharp grit sand (not building sand) is screeded to a uniform 30–50mm. We never lay blocks on a wet bed and never use mortar — both are explicit Marshalls warranty exclusions.

    06

    Block Laying — Mixed from 3+ Packs

    We lay Marshalls blocks in your chosen pattern (45° herringbone, 90° herringbone, stretcher bond or random). Crucially, we mix blocks from 3 or more packs simultaneously to blend any minor batch shade variations — a Marshalls Register requirement that prevents 'patchy' driveways.

    07

    Cutting with Diamond-Blade Block Splitters

    Edge cuts are made with a diamond-blade saw or hydraulic block splitter — never a chisel. Cuts are kept to a minimum of one-third of a full block to maintain interlock strength.

    08

    Kiln-Dried Jointing Sand & Final Compaction

    Kiln-dried silica sand is brushed into every joint and the entire surface is compacted with a rubber-matted plate to lock the blocks together. We top up jointing sand a second time, then sweep and pressure-rinse the surface.

    09

    Marshalls Register Sign-Off & Guarantee Activation

    Final inspection against the Marshalls installation checklist. You receive a written 25-year workmanship guarantee from us, plus the Marshalls product guarantee on the blocks themselves — only available because we're on the Marshalls Register.

    Why "Marshalls Register" actually matters

    Anyone can buy Marshalls blocks from a builder's merchant. Very few Edinburgh installers are on the Marshalls Register — Marshalls' own vetted network of approved installers. Membership requires proven workmanship, BS 7533 compliance, customer-satisfaction auditing and ongoing technical training.

    • Manufacturer guarantees only apply when installation follows Marshalls' spec
    • Direct technical line to Marshalls for product, colour and pattern advice
    • Priority access to new ranges and trade-only colour mixes
    • Independent customer-satisfaction reviews submitted to Marshalls

    Streets & Mews We Cover in the West End

    Drumsheugh Gardens
    Rothesay Place
    Rothesay Terrace
    Coates Crescent
    Coates Gardens
    Manor Place
    Eglinton Crescent
    Glencairn Crescent
    Palmerston Place
    Belford Road & Mews
    William Street
    Stafford Street
    Melville Street
    Walker Street
    Chester Street

    The West End's tight streetscape and listed-building density mean every project requires careful logistics — restricted-access deliveries, dust-controlled cutting, and respectful handling of original kerbs, railings and stone gate piers. Our 15+ years of West End experience and Marshalls Register membership give Edinburgh Council conservation officers the confidence that your driveway or mews paving will meet the high bar EH3/EH12 demands.

    Need Expert Driveway Installation?

    Work with a BS 7533 certified installers in Edinburgh - BS 7533 certified with lifetime guarantee and 200+ five-star reviews.

    40% Stronger Base

    Built to exceed BS 7533 standards

    Lifetime Guarantee

    Workmanship guaranteed forever

    SUDS Compliant

    Prevents pooling & freezing issues

    15+ Years

    60+ five-star customers

    Frequently Asked Questions

    Everything you need to know about our driveway services

    Ready for Your West End Listed-Building Driveway?

    Free quotes for all West End EH3/EH12 properties. Marshalls Registered Installer. Listed-building & conservation consent support included. Lifetime structural guarantee.

    Call: 0800 644 0131
    On the Marshalls Register

    Pavement Parking Ban – Affects Edinburgh's West End Homeowners

    Edinburgh's pavement parking ban means £100 fines for any vehicle parked on the pavement.Edinburgh's West End residents are being fined daily. A driveway is the only permanent, legal solution.

    How We Install Driveways in Edinburgh's West End

    Every Edinburgh's West End driveway follows our rigorous 4-stage installation process with a lifetime structural guarantee. Fully insured, CSCS-certified team — no subcontractors.